Base Board for DIMM modules

DIMM-Eco-Base Verno is a baseboard (carrier board) with all standard functions for our processor modules of the DIMM Familly.

This baseboard is ideally suited to use in standard production. For high volume applications, it can also be customised. And if you want to develop your baseboard yourself, it is of course also available as a reference design including design documents - for fast development of individual, customised solutions.

The DIMM-Eco-Base Verno supports all emtrion modules from the DIMM Familly with SODIMM connector :

• DIMM-MX257
• DIMM-MX53
• DIMM-EMEV2
• DIMM-SH7723
• DIMM-SH7724

The current processor module is easily plugged into the SODIMM connector and all the module's ports are available.

DIMM-Eco-Base Verno offers the following functions that you can use either individually or in combination according to project requirements:

• RJ45 connector for 100Base-TX Ethernet
• USB-A connector for USB-Host
• USB-B connector for USB-Device
• Socket for micro SD Card
• Stereo Audio output 3.5 mm jack
• 2 CAN-Bus connectors: 1* LVTTL and 1* integrated High-Speed Transceiver
• Interface for TFT LCDs with 4-wire Touch
• up to 5 serial ports, thereof 1*RS232 on DB9 connector and 4*LVTTL on Header connector
• 1 x analog In
• Generic Interface for digital CMOS Camera
• Extension connector with SPI, I²C and digital I/O
• 16 GPIO through integrated I²C Expander + up to 10 GPIO depending on DIMM-Module
• Spread spectrum oscillator onboard
• Temperature range -25°C ... +85°C
• 5V power supply
• 200 pos. SODIMM socket with 2.5V Keying for connection of an emtrion CPU-Module
• size: 125 x 100 x 18 mm

The availability and combinability of the individual functions depends on the DIMM module used and the operating system. Ask us about the options - we're happy to help!