Debian 8 Jessie
Software Features
- Toolchain:
- based on gcc 4.9, binutils 2.24 running natively on the device
- Debian ARM hardfloat toolchain gcc-4.9 for cross compilation
- Kernel: 3.10.53, Freescale revision 1.1.0+
- Qt: 5.3.2 - emtrion enhanced packages which make full use of the emCON-MX6 hardware accelerators
The root file system or our Debian BSP is based on Debian Stable (Jessie).
Produkt-Informationen
Distribution | Debian |
Version | 8.x |
Revision | v20150616 |
Status | not recommended for new designs |
Name | Zusammenfassung | Datei | ||||||
---|---|---|---|---|---|---|---|---|
Debian based Linux BSP - Manual | Debian based Linux BSP - Manual |
|
Fragen | |
---|---|
Enable, Disable or Remove the Demo Application |
Titel | |
---|---|
I2C under Linux | |
CAN on DIMM-MX6 / emCON-MX6 under Linux | |
SPI under Linux | |
Using GStreamer on DIMM-MX6 / emCON-MX6 under Linux | |
Display Configuration on DIMM-MX6 / emCON-MX6 under Linux | |
How to handle CPU core frequency from user space | |
GPIOs on emCON-MX6 under Linux |
Debian BSP v2015-06-16 for emtrion-MX6 (DIMM-MX6 and emCON-MX6)
- first release which supports also emCON-MX6 boards
- The software drivers for the USB OTG port are working successfully in device mode, but there is a load problem when the OTG port is used in host mode.
- When using HDMI only: the startup hang if a splash screen is shown by the bootloader on the HDMI interface. As a workaround disable the splash screen in U-Boot by removing the environment variable load_splashscreen.