Debian 9 Stretch

Software Features
  • Toolchain: based on gcc-6.3, binutils 2.27 (compilation on device or cross)
  • Kernel: Linux  4.9
  • Multimedia: OpenSource implementation of VPU and upstream gstreamer-1.0 (1.10.3)
  • Graphics-Acceleration: OpenSource etnaviv with mesa 12.0
  • QT: 5.7

Produkt-Informationen

DistributionDebian
Version 9.x
Revision v20180822
Status development ongoing
Unterstützte Core-Module

Info

The Kernel will be based on linux-stable with some small fixes. The Userspace uses OpenSource implementations for Multimedia and Graphics. Currently no Camera-Support is included in the Kernel (exept for USB-Cameras), but is available on Request.

The display UMSH8272 is no longer supported




Click on a module name to show or hide specific data!

If you require any other feature, please contact emtrion!



Name Zusammenfassung Datei
Linux Mainline based Debian BSP Manual Linux Mainline based Debian BSP Manual
TypManual
SpracheEnglish


Fragen
Configuring the Display Output for the Qt-Demo on i.MX6 with Debian (Kernel 4.9)

Details

Enable, Disable or Remove the Demo Application

Details

Supported i.mx6-variants

  • Quad, Dual, DualLite, Solo

Supported base boards

  • DIMM module: Tarion, Cadun,
  • emCON module: Avari, Bvari

Core modules

  • The core module DIMM-MX6 has to be at least revision 3
  • DIMM-MX6-PCIe all revisions supported

The display UMSH8272 is no longer supported

 

DIMM-MX6: A recent bootloader is needed (v010 or newer)

This can be checked by the Bootloader Date printed on boot, should be 24th March 2015 or newer.

 

 



  • The Freescale i.MX6 SoC can demand a lot of power from the power supply. Therefore emtrion designed a new base board Cadun which can handle the demands of our DIMM-MX6. If you already purchased a Verno with DIMM-MX6 and your application needs more power than Verno can deliver, you can contact us to exchange it with a Cadun. Because of mentioned power supply issues the Lothron base board should only be used, if you want to test a device, which can not be connected to Cadun. If you use Lothron please follow this guide. DIMM-MX6-Solo can be used without limitations on Lothron.
  • On modules with 2 GB RAM there is an issue with the GPU driver. This issue results in a reset triggered by the watchdog. As a workaround you can limit the used memory by adding the parameter mem=1536M to the kernel command line. The kernel command line is set through the file /boot/uboot_script. Search in this file for the string bootargs which represents the command line.



Zurück