Debian 9 Stretch
Software Features
- Toolchain:
- Linaro ARM hardfloat toolchain gcc 6.4.1 for cross compilation
- Kernel: 4.9.50 LTS (mainline)
Produkt-Informationen
| Distribution | Debian |
| Version | 9.x |
| Revision | v20181016 |
| Status | development ongoing |
| Unterstützte Core-Module |
Info
Release with Kernel Version 4.9.50 and SystemD is now available.
Click on a module name to show or hide specific data!
SBC-SAMA5D36 mit Microchip ATSAMA5D36
If you require any other feature, please contact emtrion!
| Name | Zusammenfassung | Datei | ||||||
|---|---|---|---|---|---|---|---|---|
| Debian based Linux BSP - Manual | Debian based Linux BSP - Manual |
|
||||||
| SDCard SBC-SAMA5D36 production (Debian 9 Stretch) |
This archive contents everything you need to reprogram your SBC-SAMA5D36 (for all R2/R3/R4 boards) NAND Flash. You will need a micro SDCard of at least 2GBytes. How-to: - Uncompress the image with this command line: tar Jxvf archive.tar.xz output.img (for example: tar Jxvf sbc-sama5d36_prod.img.tar.xz sbc-sama5d36_prod.img) (md5sum of extracted image: 906c89f3e9d3fad587e0f9f93cf8455f ) - Copy into a SDCard with this command line: sudo dd if=sbc-sama5d36_prod.img of=/dev/sdX bs=4M - Plug the SDCard into your SBC-SAMA5D36 and power on the board. login: root Password: hico - run ./production-script.sh Normally, the update archive doesn't contain the newest root filesystem. To be sure we recommend to update the root file system after reprogramming. Updating of the root filesystem is described in the corresponding manual WARNING: All the previous data in the NAND Flash will be erased! This also means that the U-Boot environment is reset. Please check MAC Addresses, serial number, board revision using "printenv" in U-Boot before updating to be able to set them during the update. |
|
| Fragen | |
|---|---|
| Enable, Disable or Remove the Demo Application |
Debian BSP v20181016 for SBC-SAMA5D36
- first release with Debian 9.x Stretch