Windows Embedded CE 6.0 R3

Produkt-Informationen

Version CE 6.0 R3
Status not recommended for new designs
Unterstützte Core-Module



Click on a module name to show or hide specific data!

If you require any other feature, please contact emtrion!



Click on a module name to show or hide specific data!

If you require any other feature, please contact emtrion!



Name Zusammenfassung Datei
U-Boot v2010.06em8 Bootloader Manual Rev6 (22.06.2011)
Change date04.08.2017
TypManual
SpracheEnglish
Documentation HCAN2-SW Software Documentation of HCAN2 driver
for Windows embedded CEâ„¢ 6.0 R2
Change date04.08.2017
TypManual
SpracheEnglish
Kernel Description
Change date04.08.2017
TypManual
SpracheEnglish
Release Notes (DIMM-MX257DevKitCE6) Release Notes of the fifth release of the DIMM-MX257 Developer Kit for Windows embedded CE 6 (WCE6)
Change date25.01.2020
TypApplication Note
SpracheEnglish
WCE 6.0 package for GUI based devices Windows Embedded CE 6.0 R3 package for GUI based devices ("Starterkit Kernel")
Change date04.08.2017
TypKernel
SpracheEnglish
WCE 6.0 pkg. for GUI based dev. + Silverlight Windows Embedded CE 6.0 R3 package for GUI based devices including Silverlight libraries. This package only includes an image for the standard variant (no camera) of the DIMM-MX257. The libraries add 4 MBytes to the image and therefore remove 4 MBytes of free RAM for the applications at runtime.
Change date04.08.2017
TypKernel
SpracheEnglish


Titel
How to get an update of your Developer Kit

Details

Supported display resolution and connectivity on DIMM-MX257 under WEC6 R3

Details



02.08.2016 - V0601

  • BugFix: now the ethernet driver is initialized again
  • Everything compiled using all Microsoft updates for Windows Embedded CE 6 R3 which was available till July 29th, 2016
  • Starting with this release the precompiled image with camera support is only available from emtrion on request
     

13.11.2014 - V0600

  • Auto-detection of mounded NAND flash type and timings using the ONFI (required to support hardware revision R2C and later)
  • Recalculated settings of the baudrates of the can interface
     

31.07.2013 - V0501

  • Fixing an issue loading the optional GPIO driver with ActivateDevice (Note: GPIO driver not included in the Developer Kit but available on request)
  • New parameter -headless for the tools RevisionInfo and Writereg. This parameter forces all output to the command line interface
  • Everything compiled using all Microsoft updates for Windows Embedded CE 6 R3 which was available till July 29th, 2013
  • Added mechanismn to avoid multiple pending RS232 notification events for starting ActiveSync client at system startup
  • The driver handles now the case that UBoot doesn't configured the display. In this case the driver assumes a 320×240 display.
  • The driver handles the unloading of the driver now correctly without any exceptions.
     

17.06.2011 - V0500

  • changes in touch driver to support more touch screens
  • fixed problem with RTC after warm boot
     

29.11.2010 - V0400

  • fixed problem in Ethernet driver which resulted in incorrect MAC
  • fixed problem in Ethernet driver concerning link status
  • improved touch screen driver performance
     

28.07.2010 - V0300

  • support for camera variant of DIMM-MX257 available
  • support for SPI interface available
     

09.07.2010 - V0200

  • added driver for the CAN controllers of DIMM-MX257 (HiCOCAN Architecture)
  • removed flashing screen on startup
  • reduced USB Function speed to full-speed at maximum
     

08.06.2010 - V0100

  • Initial release



Zurück