Debian 9 Stretch

Software Features
  • Toolchain:
    • Linaro ARM hardfloat toolchain gcc 6.4.1 for cross compilation
  • Kernel: 4.9.50 LTS (mainline)


Product Information

Version 9.x
Revision v20181016
Status development ongoing
Supported Core Modules


Release with Kernel Version 4.9.50 and SystemD is now available.

Click on a module name to show or hide specific data!

If you require any other feature, please contact emtrion!

Name Summary File
Debian based Linux BSP - Manual Debian based Linux BSP - Manual
Change date29.08.2023
SDCard SBC-SAMA5D36 production (Debian 9 Stretch) This archive contents everything you need to reprogram your SBC-SAMA5D36 (for all R2/R3/R4 boards) NAND Flash. You will need a micro SDCard of at least 2GBytes.

- Uncompress the image with this command line:
tar Jxvf archive.tar.xz output.img (for example: tar Jxvf sbc-sama5d36_prod.img.tar.xz sbc-sama5d36_prod.img)
(md5sum of extracted image: 906c89f3e9d3fad587e0f9f93cf8455f )
- Copy into a SDCard with this command line:
sudo dd if=sbc-sama5d36_prod.img of=/dev/sdX bs=4M
- Plug the SDCard into your SBC-SAMA5D36 and power on the board.
login: root Password: hico
- run ./

Normally, the update archive doesn't contain the newest root filesystem. To be sure we recommend to update the root file system after reprogramming. Updating of the root filesystem is described in the corresponding manual

WARNING: All the previous data in the NAND Flash will be erased! This also means that the U-Boot environment is reset. Please check MAC Addresses, serial number, board revision using "printenv" in U-Boot before updating to be able to set them during the update.
Change date26.10.2018

Enable, Disable or Remove the Demo Application



Debian BSP v20181016 for SBC-SAMA5D36

  • first release with Debian 9.x Stretch