Debian 8 Jessie
- based on gcc 4.9, binutils 2.24 running natively on the device
- Linaro ARM hardfloat toolchain gcc-4.9 for cross compilation
- Kernel: 4.1 LTS (mainline)
- QT5: limited support on GUI (only Widget, no QML).
|Supported Core Modules|
Beta Release with Kernel Version 4.9.11 and SystemD is now available.
Click on a module name to show or hide specific data!
SBC-SAMA5D36 mit Microchip ATSAMA5D36
If you require any other feature, please contact emtrion!
|Debian based Linux BSP - Manual||Debian based Linux BSP - Manual||
|SDCard SBC-SAMA5D36 production (Debian 8 Jessie)||
This archive contents everything you need to reprogram your SBC-SAMA5D36 (for all R2/R3/R4 boards) NAND Flash. You will need a micro SDCard of at least 1GBytes.
- Uncompress the image with this command line:
tar Jxvf archive.tar.xz output.img (for example: tar Jxvf sbc-sama5d36_prod.img.tar.xz sbc-sama5d36_prod.img)
(md5sum of extracted image: f9950709ab511860eb5764d56a7259f6 )
- Copy into a SDCard with this command line:
sudo dd if=sbc-sama5d36_prod.img of=/dev/sdX bs=4M
- Plug the SDCard into your SBC-SAMA5D36 and power on the board.
login: root Password: hico
- run ./production-script.sh
Normally, the update archive doesn't contain the newest root filesystem. To be sure we recommend to update the root file system after reprogramming. Updating of the root filesystem is described in the corresponding manual
WARNING: All the previous data in the NAND Flash will be erased! This also means that the U-Boot environment is reset. Please check MAC Addresses, serial number, board revision using "printenv" in U-Boot before updating to be able to set them during the update.
|Beta Release RootFS||
This rootfile system is a beta release for the SBC-SamA5D36 with longterm maintenance/support (LTS) Kernel 4.9 and SystemD init system. It is working but most of the peripherals haven't been tested until now.
Use this rootfs at your own risk. Support for Revision 2 Boards will be dropped in near future. Also Debian Strech may be used in one of the following (beta-)releases.
How to Install:
- use a NFS share and start the beta without installing over NFS
- use NFS, mount the NAND-Flash by hand and extract the rootfs into the mounted NAND-Flash
- modify the original production SD-card to install the beta rootfs
- update_rootfs isn't working
- a grep in /sys gives a segmentation fault
|Enable, Disable or Remove the Demo Application|
Beta Release: Debian BSP v2017-02-24 for SBC-SAMA5D36
- update to Kernel 4.9.11
- sysv initsystem replaced by systemd
Debian BSP v2015-10-28 for SBC-SAMA5D36
- added support for revision R3 of the SBC
- updated Kernel to version 4.1.10 mainline with Long Term Support
- minor fixes and additions
Debian BSP v2015-06-08 for SBC-SAMA5D36
- updated Kernel to version 4.0 mainline
- updated root file system with newest Debian Package versions
- modified DRAM initialization due to sporadic Kernel errors/Oops
- added standby functionality to switch S2
- some minor bug fixes
Debian BSP v2014-11-20 for SBC-SAMA5D36
- update Root File System with current Debian packages
- bugs corrections
- add capacitive Touchscreen
- add QT5 support
- add IPTABLE, NETFILTER config
Debian BSP v2014-09-29 for SBC-SAMA5D36
- first release