Yocto 1.7.2 Dizzy
emtrion Yocto-Layers: meta-emtrion, meta-emtrion-bsp/meta-emtrion-sbc-sama5d36
Images: kernel 4.0.0(mainline) with some patches, devicetree, root filesystem, ramdisk
Toolchain based on gcc 4.9.1, buinutils 2.24, name of the chain for cross-compiling: arm-poky-linux-gnueabi
SDK on request
|Supported Core Modules
Using the emtrion Yocto Layers you are able to build all the significant output files such as kernel, root filesystem, ramdisk and SDK for the corresponding devkit.
Click on a module name to show or hide specific data!
SBC-SAMA5D36 mit Microchip ATSAMA5D36
If you require any other feature, please contact emtrion!
|SDCard SBC-SAMA5D36 production (Debian 8 Jessie)
This archive contents everything you need to reprogram your SBC-SAMA5D36 (for all R2/R3/R4 boards) NAND Flash. You will need a micro SDCard of at least 1GBytes.
- Uncompress the image with this command line:
tar Jxvf archive.tar.xz output.img (for example: tar Jxvf sbc-sama5d36_prod.img.tar.xz sbc-sama5d36_prod.img)
(md5sum of extracted image: f9950709ab511860eb5764d56a7259f6 )
- Copy into a SDCard with this command line:
sudo dd if=sbc-sama5d36_prod.img of=/dev/sdX bs=4M
- Plug the SDCard into your SBC-SAMA5D36 and power on the board.
login: root Password: hico
- run ./production-script.sh
Normally, the update archive doesn't contain the newest root filesystem. To be sure we recommend to update the root file system after reprogramming. Updating of the root filesystem is described in the corresponding manual
WARNING: All the previous data in the NAND Flash will be erased! This also means that the U-Boot environment is reset. Please check MAC Addresses, serial number, board revision using "printenv" in U-Boot before updating to be able to set them during the update.
|basic handling around emtrion's Yocto/OpenEmbedded layers
|emtrion's Yocto-Layers and prebuild images for sbc-sama5d36, 20150623
emtrion Yocto Layers (20150623)
- First release