Windows Embedded CE 6.0 R3
Functions
novaluefound
Drivers
Name
Status
Comments
Limitations
Links
CAN interfaces
available
IrDA
on request
Audio driver for analog audio
available
Touch driver (capacitive touch)
on request
Display Driver (onchip)
available
PWM
on request
Storage Devices: SD-Card
available
Video Input
on request
Analog Video In through ADV7180 Codec
IO-Expander
on request
Serial interfaces (RS232)
available
Camera interfaces (CMOS)
available
The camera support is not in the default image. If you need this support you can get an image from emtrion on request.
Only supported with camera variant of the DIMM-MX257 module. Supported camera sensors: Omnivision OV2640, Omnivision OV7720. If you need a driver for another camera sensor feel free to contact us.
On-board Ethernet (10/100MBit/s)
available
Analog Digital Converter (In)
on request
GPIO driver
available
Available as separate Add-On. Please contact emtrion.
SPI
available
I2C
available
Storage Devices: Flash File System (NAND)
available
Touch driver (resistive touch)
available
Watchdog
on request
USB Function driver
available
The function "Serial Client (MS Mobile Device Service)" and "Mass Storage Client" are included. If another function is needed send a request to emtrion.
USB Host interface driver
available
The driver support handles "Mass-Storage Devices" and "Human interface devices (HID), keyboard and mouse)". Support for other devices such as serial port adapters are available on request.
RTC DS1337
available
True
Dienste
Name
Status
Comments
Limitations
Links
Persistente/Hive-based Registry
available
True
Release Notes
02.08.2016 – V0601
- BugFix: now the ethernet driver is initialized again
- Everything compiled using all Microsoft updates for Windows Embedded CE 6 R3 which was available till July 29th, 2016
- Starting with this release the precompiled image with camera support is only available from emtrion on request
13.11.2014 – V0600
- Auto-detection of mounded NAND flash type and timings using the ONFI (required to support hardware revision R2C and later)
- Recalculated settings of the baudrates of the can interface
31.07.2013 – V0501
-
Fixing an issue loading the optional GPIO driver with ActivateDevice (Note: GPIO driver not included in the Developer Kit but available on request)
-
New parameter -headless for the tools RevisionInfo and Writereg. This parameter forces all output to the command line interface
-
Everything compiled using all Microsoft updates for Windows Embedded CE 6 R3 which was available till July 29th, 2013
-
Added mechanismn to avoid multiple pending RS232 notification events for starting ActiveSync client at system startup
-
The driver handles now the case that UBoot doesn’t configured the display. In this case the driver assumes a 320×240 display.
-
The driver handles the unloading of the driver now correctly without any exceptions.
17.06.2011 – V0500
-
changes in touch driver to support more touch screens
-
fixed problem with RTC after warm boot
29.11.2010 – V0400
-
fixed problem in Ethernet driver which resulted in incorrect MAC
-
fixed problem in Ethernet driver concerning link status
-
improved touch screen driver performance
28.07.2010 – V0300
-
support for camera variant of DIMM-MX257 available
-
support for SPI interface available
09.07.2010 – V0200
-
added driver for the CAN controllers of DIMM-MX257 (HiCOCAN Architecture)
-
removed flashing screen on startup
-
reduced USB Function speed to full-speed at maximum
08.06.2010 – V0100
-
Initial release
Please feel free to contact us
Distributors
After Sales Support
Repairs
News & Events 
References & Success Stories
Partner Network
Industries
Quality Management
Computer On Modules
Single Board Computer
IoT Gateways
Development Kits
Baseboards
Further Information
System Integration
Software Development
Hardware Development
Life Cycle Management 
Consulting