Cadun
CADUN Baseboard with HDMI interface
DIMM-Base Cadun is a baseboard (carrier board) with all the basic functions for our processor modules in DIMM format with the new option of HDMI. We especially recommend Baseboard CADUN with DIMM-MX6 module.
emtrion can easily modify it customer-specifically for the use in series production.
If you prefer developing your own baseboard, you are very welcome to use its schematics as a reference design to quickly develop your ideal solution.
Product Information
| Current Revision | R1B |
| Status | mass production / perfective maintenance |
| Temperature Range | -25°C – 85°C |
| Size (WxDxH) | 125mm x 100mm x 18mm |
| Power Consumption | max. 5A |
| Supported Core Modules |
Connectivity
| CAN (LVTTL) via Pin Header | 1 x |
|---|---|
| CAN (with transceiver) via DSub-9 | 1 x |
| GPIO (I²C expander) via Pin Header | 14 x |
| I²C via Pin Header | 1 x |
| SPI via Pin Header | 2 x |
| UART (LVTTL) via Pin Header | 4 x |
| GPIO (from SODIMM) via Pin Header | 10 x |
| UART (RS232) via DSub-9 | 1 x |
| 100Base-TX Ethernet via RJ45 Jack | 1 x |
| SD Interface via microSD socket | 1 x |
| USB Host 2.0 via USB-A Connector | 1 x |
| Analog input via Pin Header | 1 x |
| USB Device via miniUSB Connector | 1 x |
Multimedia
| Camera (generic) via Pin Header | 1 x |
|---|---|
| Analog Audio via 3,5 mm Audio Jack | 1 x |
| LCD Interface (generic) via DF13 Connector | 1 x |
| LVDS Interface (generic) via LVDS Connector | 1 x |
| HDMI Interface via HDMI Connector | 1 x |
| Resistive Touch connectable | 1 x |
| Capacitive Touch connectable | 1 x |
Miscellaneous
| Backlight (5V) via Pin Header | 1 x |
|---|---|
| 5V Power Supply via 2 mm Power Jack | 1 |
| Spread Spectrum Oscillator | 1 x |
Power
| max Power | 5A |
|---|---|
| Voltage | 5V |
Operating temperature
| -25°C – 85°C |
Mechanical dimensions
| Width | 125mm |
|---|---|
| Depth | 100mm |
| Height | 18mm |
| Name | Summary | File | ||||||
|---|---|---|---|---|---|---|---|---|
| Base Cadun (Hardware Manual V3) | Hardware Manual for Cadun Baseboards |
|
||||||
| Baseboard Design Notes V6 | This design guide give you some hints to design a baseboard for emtrion core modules. |
|
||||||
| EcoBase Cadun-1 | Errata Sheet for Cadun-1 with hardware revision R1A and R1B. |
|
||||||
| EcoBase Cadun-1 (PCN V1) | Product Change Notification for Cadun-1. |
|
||||||
| UART Translation Table | Overview for UART interfaces of CPU modules and baseboards. |
|
||||||
| GPIO Translation Table | GPIO Translation Table for DIMM-Series CPU Modules |
|
||||||
| Using HDMI on DIMM-MX6 and Cadun | Explanation and Workarounds for using HDMI EDID protocol on DIMM-MX6 and Cadun |
|
| Name | Summary | ||
|---|---|---|---|
| DIMM-MX6 | CPU module with NXP i.MX6 Cortex-A9 Quad-/Dual-/Single-Core Processor |
|
|
| DIMM-RZ/A1H | CPU module with Renesas RZ/A1H - ARM Cortex A9-Processor |
|
|
| DIMM-MX53x | CPU module with NXP i.MX53x - ARM Cortex A8-Processor |
|
|
| DIMM-AM335x | CPU module with Texas Instruments AM335x - ARM Cortex-A8 Processor |
|
|
| DIMM-MX257 | CPU module with NXP i.MX257 - ARM9 Processor |
|
|
| Display Unit ET0700-KEY | WVGA display (800x480 Pixel) with capacitive touch screen and capacitive key pad |
|
|
| Display Unit UMSH-8272MD | WVGA display (800x480 Pixel) with resistive touch screen |
|
|
| ADA-CAN_3V3 | Adaptation cable with high-speed CAN transceiver from LVTTL interface to CAN (D-SUB9). |
|
|
| ADA232 | Adaptation from LVTTL UARTs to RS232 with D-SUB9 connector. |
|