Yocto 1.5.1 Dora

Home 9 Yocto 1.5.1 Dora

Toolchain: basierend auf gcc 4.8.1, binutils 2.23, Name der Kette für Cross-Kompilierung: arm-poky-linux-gnueabi
Bootloader: U-Boot 2013.10, basierend auf dem Mainline U-Boot
Kernel: 3.2.0, basierend auf dem arago/v3.2-staging Commit 19df1b5a3b5059fedebc19f3d51e1cdef6647492 – 3.14 ist ebenfalls verfügbar, bitte schauen Sie in der Sektion Downloads nach
Qt: 4.8.5 mit QWS (wenn Sie an Qt5 interessiert sind, kontaktieren Sie uns bitte)

Das Root-Dateisystem in unserem emBSP wird mit Yocto/OpenEmbedded (Yocto Version 1.5.1) erstellt. Die Layer für Yocto/OpenEmbedded sind auf Anfrage erhältlich, aber bitte haben Sie Verständnis dafür, dass wir Sie nicht kostenlos unterstützen können, wenn Sie Probleme mit diesem mächtigen aber komplizierten Build-System haben. Wenn Sie neu in Linux sind, werden die ersten Schritte mit emLinux viel einfacher sein.

Angebotsanfrage

Dokumente

Funktionen

novaluefound

Drivers

True

Dienste

novaluefound

Release Notes

emBSP v2014-04-17 for DIMM-MX6

built with Yocto version 1.5.1 (Dora)
this leads to many SW updates as seen above amongst others. Also the Heartbleed bug in OpenSSL is fixed.
hardfloat ABI is now used, this is incompatible with previous softfloat code
support for DIMM-MX6 rev4 and rev5 boards

emBSP v2013-06-26 for DIMM-MX6

introduce support for DIMM-MX6-Solo and DIMM-MX6-DualLite
the same BSP including the kernel supports all variants of DIMM-MX6 (Solo, DualLite, Dual and Quad)

emBSP v2013-05-24 for DIMM-MX6

Updated kernel and root file system to Freescale BSP release 4.0.0
Analog camera support added. Camera drivers are now compiled as modules. For more information read the gstreamer info. Analog camera input is only available on Lothron baseboard
DVI output available on Lothron baseboard
GPU clock frequency limit removed. Use Cadun base board with this release, if you encounter power supply issues.

emBSP v2013-03-22a for DIMM-MX6

Fixed problem with toolchain in emBSP

emBSP v2013-03-22 for DIMM-MX6

Camera: VM009 camera module (mt9m131 sensor) now supported. Also USB cameras are supported.
UARTs: all five UARTs are now available
RootFS: SW update of many components of the RootFS (based on Yocto version 1.3 (danny) and Freescale BSP version 1.1.1)

emBSP v2013-01-17 for DIMM-MX6

RootFS: fixed problem with umountfs script

emBSP v2013-01-14 for DIMM-MX6

Added support for following peripherals: USB Device, HDMI (video only), CAN, Watchdog, Audio, SPI, SATA. For further information and hints about using the peripherals please have a look at the list above
support of DIMM-MX6 hardware revision 2. Please note that hardware revision 1 is no longer supported. If you have a revision 1 board, we will exchange it for you.
bug fixes and improvements

emBSP v2012-11-16 for DIMM-MX6

Initial Release

Known Issues

The Freescale i.MX6 SoC can demand a lot of power from the power supply. Therefore emtrion designed a new base board Cadun which can handle the demands of our DIMM-MX6. If you already purchased a Verno with DIMM-MX6 and your application needs more power than Verno can deliver, you can contact us to exchange it with a Cadun. Because of mentioned power supply issues the Lothron base board should only be used, if you want to test a device, which can not be connected to Cadun. If you use Lothron please follow this guide. DIMM-MX6-Solo can be used without limitations on Lothron.

Hardware Revision 1

you must connect the USB device port to a USB Host port (e.g. of your Host PC) to be able to use the USB Host port(s) of the developer kit

Article

Artikel vorhanden: True

Block diagram

Downloads / Documents

emLinux Manual v8

30. August 2023 - en

Download

emBSP v2014-04-17 for DIMM-MX6

22. June 2018 - en

Download

Developer Kits

Sorry, No posts.

Zubehör

Sorry, No posts.

Unterstützte Betriebssysteme

Sorry, No posts.

FAQ

Media

[lw_acf_youtube_embed]

Zurück