U-Boot 2014.10

v12 U-Boot 2014.10-00002-g5cc4744 (Jun 08 2015 – 10:48:11):

– Fix of RAM timing issue which occurs on a few DIMM-MX6 modules

v11 U-Boot 2014.10 (Apr 17 2015 – 10:22:34):

– Fix problem of v10 with RAM timing for DIMM-MX6 Dual

v10 U-Boot 2014.10 (Mar 24 2015 – 12:57:38):

– Update to U-Boot mainline release 2014.10

– Add support for modifying device tree nodes of DIMM-MX6 device trees at bootup

v9 U-Boot 2013.04-00001-g67c32d1 (Jul  21 2014 – 10:36:58):

– Added support for additional DDR configurations with DIMM-MX6 modules

v8 U-Boot 2013.04-00025-g66c9696 (Jun 17 2014 – 14:17:35):

– Added support for DIMM-MX6 modules with 2GB DDR
– Improvement: setting of the DDR timing changed for better support of -ET modules
– BugFix: detection of the ET0700M06 display adapters works now
– BugFix: issue with the ethernet auto-negotiation is fixed
– BugFix: the environment variable serverip cannot longer set through the response of the DHCP request
– New: if there is no splash screen image found the emtrion logo is shown as default image (instead of the penguin)
– New: the u-boot mention now if it is running on the DIMM-MX6Q-PCIe boards

v7:
– Added support for booting WinCE images with bootm command
– Added support for PMIC on hardware revision r4 and above
– BugFix: setting of USB voltage on hardware revision r2

v6:
– BugFix: correction of erase size for the flash area used by u-boot when updating u-boot

v5:
– Update: now we are using the u-boot mainline revision 2013.04
– Added splash screen support
– Added support for DIMM-MX6S with i.MX6S processors
– Added board specific command envreset to allow an easier way for resetting the environment to default environment preserving for important value (ethaddr, product type, revision, S/N)
– Changed: The storage location of the u-boot environment in flash was moved to get more space for the code

v4:
– changed default environment to allow update and boot commands to use tftp protocol. This is necessary for other operating systems like Windows CE and QNX.

v3:
– change: environment variable bootcmd was removed from default environment
– BugFix:  fixed bug in IOMUX of UART4

v2:
– Added support for i.MX6 internal LDO bypass and PFUZE pmic setup. Regard that the operating system must also be aware of the LDO bypass.
– Added multiplexing for hardware revision R2A
– Added: PMIC now supplies 5V for USB Host.
– Added: modified muxing for SODIMM SPI I/F. Added success msg in update uboot script.
– BugFix: GPIO muxing

v1:
– Initial revision