emSBC-Neon-CM4 with STM32F479NI from STMicroelectronics
Single Board Computer with Cortex-M4
Do you have growing requirements in the areas of real-time capabilities and energy efficiency?
The emSBC-Neon-CM4 is based on the emSTAMP-Neon-CM4 module with ST's MCU STM32F479NI. It meets these requirements of high efficiency and offers a long-term availability of up to 15 years.
The operating system FreeRTOS is available for modules and SBCs of the Neon family. Choose the developer kit with or without display for a quick start into your application development.
Key features:
- Microcontroller STM32F479NI from ST
- Single-core 32-bit ARM Cortex-M4
- Up to 180 MHz clock speed
- high energy efficiency
- Floating point unit (FPU)
- Interfaces: Ethernet 10/100Mbit (LAN8720), CAN, SPI, I2C, DAC, ADC, RGB18 LCD, USB 2.0 Host and Device, MicroSD, JTAG, UART, RTC, SDIO, 6x GPIO, SAI (Serial Audio Interface)
- industrial module (COM/SOM), also available in extended temperature range
- Up to 32MB SDRAM and 16MB QSPI NOR Flash
- scalable and long-term available
- IoT capable
- Size 118mm x 54mm
Product Information
| Current Revision | R1A |
| Status | available |
| Temperature Range | ; opt. -20°C – 85°C |
| Size (WxDxH) | 118mm x 54mm x 18mm |
| Power Consumption | max. NA |
Processor
| CPU Manufacturer | STMicroelectronics |
|---|---|
| CPU Cores | 1 |
| CPU Name | STM32F479 |
| CPU Type | Cortex-M4 |
| CPU Clock | 180 MHz |
Memory
| SDRAM | 8 – 32 MB | |
|---|---|---|
| NOR-Flash | 1 – 16 MB | |
Connectivity
| 100Base-TX Ethernet via RJ45 Jack | 1 x |
|---|---|
| CAN (LVTTL) via Cage Clamp | 1 x |
| USB Host 2.0 via USB-A Connector | 1 x |
| GPIO (3-phase motor control PWM) via Pin Header | 6 x |
| SPI Interface via Pin Header | 2 x |
| MMC/SDC Interface via microSD Socket | 1 x |
| UART LVTTL (RTS/CTS) via Pin Header | 1 x |
| UART (LVTTL) via Pin Header | 1 x |
| I²C Interface via Pin Header | 1 x |
| ADC (12bit) via Pin Header | 3 x |
| DAC (12bit) via Pin Header | 2 x |
| USB device 2.0 via microUSB-AB Connector | 1 x |
Multimedia
| SAI (Serial Audio Interface) via Pin Header | 1 x |
|---|---|
| LCD Interface (RGB18) via FCC Connector | 1 x |
Miscellaneous
| JTAG (ARM) interface via pin header | 1 x |
|---|---|
| Chrom-ART Accelerator™ (DMA2D) | 1 x |
| RTC (battery buffered) via CR1632 Holder | 1 x |
Supported operating systems
| FreeRTOS |
Power
| max Power | NA |
|---|---|
| Voltage | 7-24V |
Operating temperature
| -20°C – 85°C (extended) |
Mechanical dimensions
| Width | 118mm |
|---|---|
| Depth | 54mm |
| Height | 18mm |
| Name | Summary | File | ||||||
|---|---|---|---|---|---|---|---|---|
| emSTAMP-Neon Hardware Manual | Hardware Manual Microcontroller Module |
|
||||||
| emSBC-Neon Hardware Manual | Hardware Manual emSBC-Neon |
|
||||||
| Flyer emSBC-Neon | Flyer of emtrion's Single Board Computer emSBC-Neon |
|
||||||
| Software Manual emSTAMP-Neon-CM4 | Software Manual emSTAMP-Neon-CM4 |
|
||||||
| Altium Designer Symbols, Footprint and 3D-Model for emSTAMP-Neon | Altium Designer Symbols, Footprint and 3D-Model for emSTAMP-Neon |
|
