emSBC-SAMA5D36 mit ATSAMA5D36 von Microchip
Single Board Computer mit Cortex-A5
Sie haben wachsende Anforderungen im Bereich Energieeffizienz und High Speed?
Der SBC-SAMA5D36 erfüllt die Anforderungen und bietet eine Langzeitverfügbarkeit von bis zu 15 Jahren.
Darüber hinaus stellen Ihnen emtrions Softwarespezialisten hauseigene Board Support Packages (BSP) zur Verfügung. Für SBC-SAMA5D36 sind die Betriebssysteme Linux Yocto, Debian und Buildroot verfügbar.
Key Features:
- Prozessor ATSAMA5D36 von Microchip (Atmel)
- optional auch mit erweitertem Temperaturbereich (ATSAMA5D36-ET) und ohne HDMI erhältlich
- ARM Cortex-A5
- 536MHz Taktfrequenz
- hohe Energieeffizienz
- Interfaces u.a: 2x Ethernet (1x GbE), 2x USB Host, 1x USB Device, LCD Interface, HDMI
- Ethernet/IP, PROFINET, CANopen optional verfügbar
- industrielles Single Board Computer (SBC) und im erweiterten Temperaturbereich verfügbar
- 512MB RAM und bis zu 2GB NAND Flash (SLC)
- skalierbar und langzeitverfügbar
- Fastboot optional verfügbar
- IOT tauglich
Für einen schnellen Start Ihrer Applikations-Entwicklung wählen Sie das für Sie passende Developerkit aus unserer abwechslungsreichen Zusammenstellung.
Alle Infos zu emtrion's SBC SAMA5D36 finden Sie auch hier.
Produkt-Informationen
Current Revision | R4A |
Status | available |
Temperature Range | 0°C – 70°C; opt. -40°C – 85°C |
Size (WxDxH) | 135mm x 74mm x 15mm |
Power Consumption | max. 300mA |

Prozessor
CPU Clock (max) | 536 MHz |
---|---|
CPU Cores | 1 |
CPU Manufacturer | Microchip |
CPU Name | SAMA5D36 |
CPU Type | Cortex-A5 |
Security Module | yes |
Speicher
NAND-Flash | 512 – 2048 MB | |
---|---|---|
NOR-Flash | 8 – 32 MB | |
DDR2-SDRAM | 256 – 512 MB |
Konnektivität
Digital GPIO | 52 x |
---|---|
Ethernet 100BASE-TX | 1 x |
I²C Interface | 3 x |
MMC/SDC Interface | 2 x |
SPI Interface | 1 x |
USB Device 2.0 high speed | 1 x |
USB Host 2.0 high speed | 2 x |
Ethernet 1000BaseT | 1 x |
UART LVTTL | 5 x |
CAN LVTTL | 2 x |
SD Interface via microSD socket | 1 x |
PWM output | 5 x |
Multimedia
SSI Interface for Audio Codec | 1 x |
---|---|
LCD Interface (RGB) | 1 x |
LCD Interface (HDMI) | 1 x |
EDT Display via FFC Connector | 1 x |
Resistive Touch connectable | yes x |
Capacitive Touch connectable | yes x |
Miscellaneous
RTC (battery buffered) | 1 x |
---|---|
5V Power Supply via 2 mm Power Jack | yes |
Over- and Undervoltage protection | yes |
Lithium Battery Charger | yes |
Analog Input | 5 x |
5V Power Supply via USB | yes |
User Buttons | 2 x |
User LEDs | 4 x |
Unterstützte Betriebsysteme
Debian | |
Buildroot | |
Yocto |
Power
max Power | 300mA |
---|---|
Voltage | 5V |
Betriebstemperatur
0°C – 70°C | |
-40°C – 85°C (erweitert) |
Abmessungen
Width | 135mm |
---|---|
Depth | 74mm |
Height | 15mm |
Name | Zusammenfassung | Datei | ||||||
---|---|---|---|---|---|---|---|---|
Hardware Manual SBC-SAMA5D36 | Hardware Manual for SBC-SAMA5D36 |
|
||||||
SDCard SBC-SAMA5D36 production (Debian 8 Jessie) |
This archive contents everything you need to reprogram your SBC-SAMA5D36 (for all R2/R3/R4 boards) NAND Flash. You will need a micro SDCard of at least 1GBytes. How-to: - Uncompress the image with this command line: tar Jxvf archive.tar.xz output.img (for example: tar Jxvf sbc-sama5d36_prod.img.tar.xz sbc-sama5d36_prod.img) (md5sum of extracted image: f9950709ab511860eb5764d56a7259f6 ) - Copy into a SDCard with this command line: sudo dd if=sbc-sama5d36_prod.img of=/dev/sdX bs=4M - Plug the SDCard into your SBC-SAMA5D36 and power on the board. login: root Password: hico - run ./production-script.sh Normally, the update archive doesn't contain the newest root filesystem. To be sure we recommend to update the root file system after reprogramming. Updating of the root filesystem is described in the corresponding manual WARNING: All the previous data in the NAND Flash will be erased! This also means that the U-Boot environment is reset. Please check MAC Addresses, serial number, board revision using "printenv" in U-Boot before updating to be able to set them during the update. |
|
||||||
SDCard SBC-SAMA5D36 Buildroot Xenomai test |
This SDCard image is for test purposes only! You will need at least a 2GB micro SDCard. it includes a Linux Kernel v3.14.17 patched with Xenomai and a simple RootFS made with Buildroot. Login:root Password:hico |
|
||||||
PCN_SAMA5D36_v001en | Product Change Notification SBC-SAMA5D36, Rev 3 |
|
||||||
PCN_SAMA5D36_v002en | Product Change Notification |
|
||||||
Flyer SBC SAMA5D3 | Flyer of emtrions's Single Board Computer SAMA5D3 |
|
||||||
SBC-SAMA5D36 Development Kit Manual | SBC-SAMA5D36 Development Kit Manual - Yocto based BSP Manual |
|

Name | Zusammenfassung | ||
---|---|---|---|
Display ETM0700G0BDH6 | WVGA Display (800x480 Pixel) mit kapazitivem Touch Screen. | ||
SBC-Case | Gehäuse passend für SBC-SAMA5D36, Aluminium, Klemme für Hutschienenmontage optional | ||
SBC_EXT1 | Das SBC-EXT1 Modul ist eine einfache serielle Erweiterung für den Singleboard Computer SBC-SAMA5D36. | ||
IOT-EXT1-2 | IOT Erweiterungsbaugruppe für SBC-SAMA5D36 mit WiFI Interface, TPM und I/O Anschlüssen |
Fragen | |
---|---|
Using JTAG on SBC-SAMA5D36 The SBC-SAMA5D36 has a 10pin JTAG Connector. How can I connect it to the 20pin connector of my debugger? |