emSBC-SAMA5D36 with ATSAMA5D36 from Microchip
Single Board Computer with Cortex-A5
Do you have growing requirements in the areas of energy efficiency and high speed?
The SBC-SAMA5D36 addresses these requirements and offers a long-term availability of up to 15 years.
emtrions software specialists also provide you with in-house board support packages (BSP).
For the SBC-SAMA5D36 are the operating systems Linux Debian, Yocto and Buildroot available.
Key features:
- Microchip (Atmel) processor ATSAMA5D36
- optionally available with extended temperature range (ATSAMA5D36-ET) and without HDMI
- ARM Cortex-A5
- 536MHz clock speed
- high energy efficiency
- interfaces include: 2x Ethernet (1x GbE), 2x USB Host, 1x USB Device, LCD interface, HDMI
- Ethernet/IP, PROFINET, CANopen optionally available
- industrial Single Board Computer (SBC), also available in extended temperature range
- 512MB RAM and up to 2GB NAND flash (SLC)
- scalable and long-term available
- Fastboot optionally available
- IoT capable
Choose the right developer kit from our versatile compilation for a quick start into your application development.
Here you find also all relevant information to SBC SAMA5D36 at a glance.
Product Information
| Current Revision | R4A |
| Status | available |
| Temperature Range | 0°C – 70°C; opt. -40°C – 85°C |
| Size (WxDxH) | 135mm x 74mm x 15mm |
| Power Consumption | max. 300mA |
Processor
| CPU Clock (max) | 536 MHz |
|---|---|
| CPU Cores | 1 |
| CPU Manufacturer | Microchip |
| CPU Name | SAMA5D36 |
| CPU Type | Cortex-A5 |
| Security Module | yes |
Memory
| NAND-Flash | 512 – 2048 MB | |
|---|---|---|
| NOR-Flash | 8 – 32 MB | |
| DDR2-SDRAM | 256 – 512 MB | |
Connectivity
| Digital GPIO | 52 x |
|---|---|
| Ethernet 100BASE-TX | 1 x |
| I²C Interface | 3 x |
| MMC/SDC Interface | 2 x |
| SPI Interface | 1 x |
| USB Device 2.0 high speed | 1 x |
| USB Host 2.0 high speed | 2 x |
| Ethernet 1000BaseT | 1 x |
| UART LVTTL | 5 x |
| CAN LVTTL | 2 x |
| SD Interface via microSD socket | 1 x |
| PWM output | 5 x |
Multimedia
| SSI Interface for Audio Codec | 1 x |
|---|---|
| LCD Interface (RGB) | 1 x |
| LCD Interface (HDMI) | 1 x |
| EDT Display via FFC Connector | 1 x |
| Resistive Touch connectable | yes x |
| Capacitive Touch connectable | yes x |
Miscellaneous
| RTC (battery buffered) | 1 x |
|---|---|
| 5V Power Supply via 2 mm Power Jack | yes |
| Over- and Undervoltage protection | yes |
| Lithium Battery Charger | yes |
| Analog Input | 5 x |
| 5V Power Supply via USB | yes |
| User Buttons | 2 x |
| User LEDs | 4 x |
Supported operating systems
| Debian | |
| Buildroot | |
| Yocto |
Power
| max Power | 300mA |
|---|---|
| Voltage | 5V |
Operating temperature
| 0°C – 70°C | |
| -40°C – 85°C (extended) |
Mechanical dimensions
| Width | 135mm |
|---|---|
| Depth | 74mm |
| Height | 15mm |
| Name | Summary | File | ||||||
|---|---|---|---|---|---|---|---|---|
| Hardware Manual SBC-SAMA5D36 | Hardware Manual for SBC-SAMA5D36 |
|
||||||
| SDCard SBC-SAMA5D36 production (Debian 8 Jessie) |
This archive contents everything you need to reprogram your SBC-SAMA5D36 (for all R2/R3/R4 boards) NAND Flash. You will need a micro SDCard of at least 1GBytes. How-to: - Uncompress the image with this command line: tar Jxvf archive.tar.xz output.img (for example: tar Jxvf sbc-sama5d36_prod.img.tar.xz sbc-sama5d36_prod.img) (md5sum of extracted image: f9950709ab511860eb5764d56a7259f6 ) - Copy into a SDCard with this command line: sudo dd if=sbc-sama5d36_prod.img of=/dev/sdX bs=4M - Plug the SDCard into your SBC-SAMA5D36 and power on the board. login: root Password: hico - run ./production-script.sh Normally, the update archive doesn't contain the newest root filesystem. To be sure we recommend to update the root file system after reprogramming. Updating of the root filesystem is described in the corresponding manual WARNING: All the previous data in the NAND Flash will be erased! This also means that the U-Boot environment is reset. Please check MAC Addresses, serial number, board revision using "printenv" in U-Boot before updating to be able to set them during the update. |
|
||||||
| SDCard SBC-SAMA5D36 Buildroot Xenomai test |
This SDCard image is for test purposes only! You will need at least a 2GB micro SDCard. it includes a Linux Kernel v3.14.17 patched with Xenomai and a simple RootFS made with Buildroot. Login:root Password:hico |
|
||||||
| PCN_SAMA5D36_v001en | Product Change Notification SBC-SAMA5D36, Rev 3 |
|
||||||
| PCN_SAMA5D36_v002en | Product Change Notification |
|
||||||
| Flyer SBC SAMA5D3 | Flyer of emtrions's Single Board Computer SAMA5D3 |
|
||||||
| SBC-SAMA5D36 Development Kit Manual | SBC-SAMA5D36 Development Kit Manual - Yocto based BSP Manual |
|
| Name | Summary | ||
|---|---|---|---|
| Display ETM0700G0BDH6 | WVGA display (800x480 Pixel) with capacitive touch screen. |
|
|
| SBC-Case | Case for SBC-SAMA5D36, aluminium, optional DIN-Rail assembly |
|
|
| SBC_EXT1 | The SBC-EXT1 module is a simple serial extension module for the CPU module SBC-SAMA5D36. |
|
|
| IOT-EXT1-2 | IOT Extension Board for SBC-SAMA5D36 with WiFI Interface, TPM and I/O connectors |
|
| Question | |
|---|---|
| Using JTAG on SBC-SAMA5D36 The SBC-SAMA5D36 has a 10pin JTAG Connector. How can I connect it to the 20pin connector of my debugger? |