emSBC-SAMA5D36
Single Board Computer emSBC-SAMA5D36 with ATSAMA5D36 from Microchip (Atmel
Do you have growing requirements in the areas of energy efficiency and high speed?
The SBC-SAMA5D36 addresses these requirements and offers a long-term availability of up to 15 years.
emtrions software specialists also provide you with in-house board support packages (BSP).
For the SBC-SAMA5D36 are the operating systems Linux Debian, Yocto and Buildroot available.
Key features:
- Microchip (Atmel) processor ATSAMA5D36
- optionally available with extended temperature range (ATSAMA5D36-ET) and without HDMI
- ARM Cortex-A5
- 536MHz clock speed
- high energy efficiency
- interfaces include: 2x Ethernet (1x GbE), 2x USB Host, 1x USB Device, LCD interface, HDMI
- Ethernet/IP, PROFINET, CANopen optionally available
- industrial Single Board Computer (SBC), also available in extended temperature range
- 512MB RAM and up to 2GB NAND flash (SLC)
- scalable and long-term available
- Fastboot optionally available
- IoT capable
Choose the right developer kit from our versatile compilation for a quick start into your application development.
Here you find also all relevant information to SBC SAMA5D36 at a glance.
Functions
CPU Clock (max)
536 MHz
CPU Cores
1
CPU Manufacturer
Microchip
CPU Name
SAMA5D36
CPU Type
Cortex-A5
Security Module
yes
NAND-Flash
512 - 2048 MB
NOR-Flash
8 - 32 MB
DDR2-SDRAM
256 - 512 MB
LCD Interface (HDMI)
1 x
LCD Interface (RGB)
1 x
EDT Display via FFC Connector
1 x
Resistive Touch connectable
yes x
Capacitive Touch connectable
yes x
SSI Interface for Audio Codec
1 x
Digital GPIO
52 x
Ethernet 100BASE-TX
1 x
I²C Interface
3 x
MMC/SDC Interface
2 x
SPI Interface
1 x
USB Device 2.0 high speed
1 x
USB Host 2.0 high speed
2 x
Ethernet 1000Base-T
1 x
UART LVTTL
5 x
CAN LVTTL
2 x
SD Interface via microSD socket
1 x
PWM output
5 x
RTC (battery buffered)
1 x
5V Power Supply via 2 mm Power Jack
yes
Over- and Undervoltage protection
yes
Lithium Battery Charger
yes
Analog Input
5 x
5V Power Supply via USB
yes
User Buttons
2 x
User LEDs
4 x
0 - 70 °C
-40 - 85 °C (extended)
Width
135 mm
Depth
74 mm
Height
15 mm
max Power
300 mA
Voltage
5 V
True
Drivers
novaluefound
Dienste
novaluefound
Release Notes
Known Issues
Article
Article available: novaluefound
Block diagram
Downloads / Documents
SDCard SBC-SAMA5D36 production (Debian 8 Jessie)
SDCard SBC-SAMA5D36 Buildroot Xenomai test
SBC-SAMA5D36 Development Kit Manual
SBC-SAMA5D36 Development Kit Manual – Yocto based BSP Manual
Accessories
FAQ
Using JTAG on SBC-SAMA5D36
The SBC-SAMA5D36 has a 10pin JTAG Connector. How can I connect it to the 20pin connector of my debugger?
The SBC-SAMA5D36 revision 3 uses a 10pin 1.27mm (0.05") pin header for the JTAG debug interface. This connector is mostly compliant with the Cortex-M Debug Connector specified by ARM. Deviating from the specification pin 9 is connected to nTRST.
You may use the J-Link 9-pin Cortex-M Adapter to adapt the standard 20pin JTAG interface to the 10pin connector of the SBC-SAMA5D36. For proper operation, you have to shorten the solder bridge NR1. Also, pin 7 is blocked by a keying peg, which must be removed.
Media
Product Media Url: https://www.youtube-nocookie.com/embed/Q0VLY3wqRTw
Please feel free to contact us
Distributors
After Sales Support
Repairs
News & Events 
References & Success Stories
Partner Network
Industries
Quality Management
Computer On Modules
Single Board Computer
IoT Gateways
Development Kits
Baseboards
Further Information
System Integration
Software Development
Hardware Development
Life Cycle Management 
Consulting