CPU Module with Renesas SH7723 (SH4)
DIMM-SH7723
This product is still available for project customers but it is not recommended for new developments!
There is no further development for this product. We would be pleased to continue assisting you in maintaining the software.
Functions
DDR-SDRAM
128 MB
NAND-Flash
256 MB
SPDIF (digital audio)
1 x
SSI Interface for Audio Codec
1 x
Camera Interface 1
1 x
LCD Interface (RGB)
1 x
Touch interface (resistive, 4-wire)
1 x
Video Output Interface für NTSC Encoder
1 x
UART IrDA
1 x
UART LVTTL
4 x
UART RS232
1 x
USB Host 2.0 high speed
1 x
USB Device 2.0 high speed
1 x
Ethernet 100BASE-TX
1 x
I²C Interface
1 x
SPI Interface
1 x
Digital GPIO
10 x
MMC/SDC Interface
2 x
CPU-Bus
1 x
RTC (battery buffered)
1 x
-20 - 70 °C
-40 - 85 °C (extended)
Width
67,6 mm
Depth
45 mm
Height
9 mm
CPU Performance: 400 MHz - 720 DMIPS
Co-Prozessor: FPU
Video Processing (
Hardware accelerated)
: H.264 decode and encode at D1@25fps
2D (
Hardware accelerated)
3D (
Hardware accelerated)
MPEG4 hardware accelerator
Low power consumption <
1,5 Watt!
True
Drivers
novaluefound
Dienste
novaluefound
Release Notes
Known Issues
Article
Article available: novaluefound
Block diagram
Downloads / Documents
UART Translation Table
Overview for UART interfaces of CPU modules and baseboards.
GPIO Translation Table
GPIO Translation Table for DIMM-Series CPU Modules
Developer Kits
Accessories
FAQ
GPIOs at DIMM-SH7723
Does the DIMM-SH7723 only have 6 GPIO pins?
emtrion's SODIMM concept has 10 pins specified for GPIO function. With DIMM-SH7723 you can use 6 pins as input and output, and 4 pins only as output. These 10 pins are always available, whatever other interfaces are in use. If more than 10 GPIO pins are needed, you can use the pins from unused CPU interfaces. For example, if you don't need the CMOS camera interface, you can use these pins (about 10) as additional GPIOs.