SDCard SBC-SAMA5D36 production (Debian 9 Stretch)
This archive contents everything you need to reprogram your SBC-SAMA5D36 (for all R2/R3/R4 boards) NAND Flash. You will need a micro SDCard of at least 2GBytes.
How-to:
– Uncompress the image with this command line:
tar Jxvf archive.tar.xz output.img (for example: tar Jxvf sbc-sama5d36_prod.img.tar.xz sbc-sama5d36_prod.img)
(md5sum of extracted image: 906c89f3e9d3fad587e0f9f93cf8455f )
– Copy into a SDCard with this command line:
sudo dd if=sbc-sama5d36_prod.img of=/dev/sdX bs=4M
– Plug the SDCard into your SBC-SAMA5D36 and power on the board.
login: root Password: hico
– run ./production-script.sh
Normally, the update archive doesn’t contain the newest root filesystem. To be sure we recommend to update the root file system after reprogramming. Updating of the root filesystem is described in the corresponding manual
WARNING: All the previous data in the NAND Flash will be erased! This also means that the U-Boot environment is reset. Please check MAC Addresses, serial number, board revision using “printenv” in U-Boot before updating to be able to set them during the update.
Please feel free to contact us
Distributors
After Sales Support
Repairs
News & Events 
References & Success Stories
Partner Network
Industries
Quality Management
Computer On Modules
Single Board Computer
IoT Gateways
Development Kits
Baseboards
Further Information
System Integration
Software Development
Hardware Development
Life Cycle Management 
Consulting